Page Comparison

...

When creating a change copy, the system checks whether the insurance contracts of the given financing contract are not in the prepared statements to the insurance company. Insurance contracts proposed in the statement for the insurance company prevent the user from creating a change copy or making a change changes to the financing contract. If the system detects that the contract is in the report, it prints a message and does not create a change copy.

...

Described in Statements for Insurance Company Výkazy pro pojišťovnu in the chapter Blocking Contracts by StatementReport.

If the wizard was launched from the contract card, the OC will leave the just created change copy open after creating the change copy.

If the wizard was run launched from the contract listoverview, the OC will not open the change copy after creating a the change copy.

At the same time:

• The original contract is blocked from changes (depending on the detailed status settings) and receives:

  • The detailed status of the contract is set according to OneCore Settings, field Detailed status during change copy.

  • the flag Change Copy Exists flag will be set to Y (it is not editable by the user-editable)

  • In the Change Copy User ID field, the system displays the ID of the user who created the change copy.

• The change copy of the contract will be an image of the original (it has the original detailed statuscondition), then:

  • The contract number will be supplemented with a postfix according to OneCore Settings, change copy postfix field

  • Last Change Code=code of the change type Change Type Code that the user selected in step 1/3 of the wizard for creating a change copy

  • flag Change copy=A

  • Contract field Change Copy field to Contract No. = Original No.

  • Change Copy User ID field. Any changes can only be made to this copy of the contract.

• After the wizard is completedfinished, either another wizard is started to perform make the change (if a change has been selected, where the wizard object number is listed, except for contract activation) or the user can manually make the requested change without the wizard.

...

This option allows the user who created the change copy (the owner of the change copy owner) to transfer the change copy of the contract to the original. By doing thisso, the changes made will be transferred to the original and the change data will be stored in the contract history. The change copy is canceled deleted after the transfer.

Once confirmed, the system will perform the following steps:

• Checks whether if the user is running functions from a change copy (i.e. the flag of the contract is Change Copy=Y):

  • If Y, it continues

  • If N, it displays an error message and does not continue:

    

• Checks if the logged-in user is the owner of the change copy:

  • If so, it continues.

  • If not, it displays an error message:

    

• Checks if there are active variants for the contract:

  • If not, it moves oncontinues

  • If so, it displays information about the existence of an active variant and asks if the user wants to continue:

    

    • Once confirmed, set After confirmation, it sets Variant Status=Inactive on all active variants and continuecontinues.

• Asks if the user really wants to overwrite the original:

  

  • After confirmation, it checks the performs a flag check to see if the contract has been recalculated.

• Checking that the contract payment calendar is up-to-date (if the contract has been recalculated after the change - ActivateChangeCopy function):

  • Service-Updated (150)=Y and

  • Insurance-Updated (151)=Y and

  • Payments-Updated (152)=Y– all three must be Y, otherwise it will display the message:

    

    • and does not transfer the change copy.

    • If all symptoms are Y, proceed to the next step.

• Checks if there are insurance contracts for the financing contract to be reported or unsubscribed online.

  • To report a new insurance policy The system checks whether the insurance contract contains:

    • Insurance Reporting OnLine = Yes

    • Insurance Company Check-in Date = empty

    • Termination Code = Empty

  • If there is an insurance policy that meets these conditions, it checks whether the insurance framework contract contains the flag Insurance Company Verification Required = Yes. If:

    • Yes

      • Checks if the Verified = Yes fields are present on the insurance contract if:

        • No

          • Displays the error message "Verified must be Yes on insurance contract XY" and stops the change copy transfer process

        • Yes

          • Checks if the fuse Valid From < the current date. If Yes, it checks whether Valid From is equal to the date in the field Object Return Date on Financed Object Card. If Yes, the policy opt-out system will use the Valid To From the fuse the current system date, and to the insurance company's calendar and commission calendar Completes rows for the period from returning the object to the current date (The daily rate will be applied according to the "daily rate calculation" set on the insurance company's product, see below for an example). If not, you will receive the error message "Insurance XXX. Valid from must be >= current date!" And the transfer of the change copy stops

Current date is 04.06.2024, Financed Object Return = 31.5.2024, insurance contracts:

Notification:

• In the statement definition, it is necessary to set the "Disposals" report to the Valid to field from the statement line, not from the Insurance contract

Insurance calendar for a regular insurance client:

Insurance Calendar for Insurance Company Regular Insurance :

• • • No

      • In the OC, the preparation for calling the service for reporting the insurance policy (reporting addition) continues with the process of transferring the change copy

• To unsubscribe from an insurance policy online, the system checks whether the insurance contract includes:

  • OnLine Reporting = Yes

  • Insurance Company Check-out Date = blank

  • Termination Code = non-empty, or Early Termination = Yes

• When there is an insurance policy that meets these conditions, it checks:

  • If the policy says Valid To < the current date. If:

    • Yes

      • Checks on Termination Code whether it has Allowed to terminate retroactively = Yes. If:

        • Yes

          o Preparation for calling the service to unsubscribe the insurance policy (attrition reporting). The proclamation takes place in the background.

        • No or Termination Code is not filled in

          o Displays the error message "Insurance XXX. Valid to must be>= current date!" and the change copy transfer stops

    • No

      • Preparation for calling the service to unsubscribe the insurance policy (report attrition). The proclamation takes place in the background.

• If there is no policy on the contract that meets the conditions for unsubscribing or reporting, it proceeds to the next check

• Checking the Strict Changes List Policy flag in OneCore Setup:

  • If n

    • On the last line in the Contract Change History, toggles:

      • Flag flag Closed on Y

      • Customer Approval flag on Y

      • Cust.Approval Date=sysdate

      • add date Approved On=sysdate

  • If Y

    • Checks if the flag is Closed=Y (i.e. it was toggled by the user as part of to approve the change approval before the transfer)

    •  If Y

      • Performs a change copy transfer

    • If n

      • Displays a message and does not transfer the change copy:

        

      • The user then opens the Contract Change History on the change copy, closes the line, and transfers the change copy.

• Change Copy Transfer

  • Before transferring, the system adds the following changes to the line:

    • Financing Period-New from the Financing Period (in Month) field from the change copy

  • In the ReplacebyChangeCopy function, the check is again:

    • Service-Updated (150)=Y and

    • Insurance-Updated (151)=Y and

    • Payments-Updated (152)=Y and

    • Calculation Lines-Updated=Y and Complete Calculation=Y– all must be Y, otherwise they will display the message:

      • Changes requiring recalculation have been made to the change copy. Please run recalculation before transferring the change copy.

  • The system copies all the data of the change copy data into to the original, then deletes the change copy

  • If it is a Leasing with delivery of goods=Y, the contract has been transferred and a corrective VAT document for the original and a new document for the new customer have been created, then the system will post these documents when transferring the change copy. See also Převod smlouvy s dodáním zboží na jiného zákazníka and Převod smlouvy

  • On the original contract, he sets:

    • Change Copy Exists=N

    • Change Copy=N

    • Last Change Code from Last Line of Contract Change History

    • Adds the date and time of the last changemodification.

Remove change copy

This option allows the user who created the change copy (the owner of the change copy) to delete the change copy without any changes being reflected in the original. The original is reverted to its original state.

When deleting a change copy by clicking the button, the last opened line row in the Contract Change History with the given change type is deleted.

If a user closes the change history manually and then deletes the change copy/variant instead of transferring it, then we no longer have the last open rowline. In this case, we delete the last corresponding closed rowline, namely the one that was created on the same day as the change copy/variant was created.

...

Renewing a change copy does not delete the a row of that change copy row from the Contract Change History.

...

Only the user who created it the change copy of the contract (the owner of the change copy) can work with a change copy of a contractit. A user who has the right to change the owner of the change copy (User Setup: Allow Change Copy Owner=Y) can use this option to change the owner of the change copy from the original owner to himself or to another person. It is recommended to use We recommend using this option, for example, in case of incapacity for work of the owner of the change copy is unable to work.