Postup vzniku tankovacích transakci je popsaný v Fuel Card Management.
Nastavení fakturační úlohy
Tlačový report
Systém generuje report z tabulky Nastavení tiskových výstupů fakturace (Invoice Printout Setup).
Systém určuje, který report bude generovat podle Invoice Print Type na kartě zaúčtované faktury.
Textace faktury a dimenze
Text do faktury se nastavuje v Nastavení smluv se službami v časti Hromadná fakturace, pole Kód standardního textu PHM.
V záložce Hromadný fakturace uživatel vybírá Kód Dimenze pro hromadnou fakturaci.
Číselná Řada
Číselná řada pro refakturaci záznamů tankovacích karet se nastavuje v Nastavení smluv se službami pole Čísla PHM prodejných faktur. Pole čísla PHM prodejných dobropisů je přichystané pole v případě dalšího vývoje.
Podrobnější popis v Business Setup .
Prefakturace bez/s zaúčtované nákupní faktury
Boolean určuje, či fakturační úloha zahrnuje/nezahrnuje záznamy, které mají hodnotu v poli číslo zaúčtované nákupní faktury.
Podrobnější popis v Business Setup .
Nastavení účtovaní
Do řádků faktury systém plní číslo finančního účtu z Kódu standardního prodeje, který je nadefinovaný ve fakturačním interfaces pro daný Kód tankovací karty.
Výšky přefakturovaných záznamů se přepisují z tabulky Transakci tankovacích karet.
Popis způsobu výpočtu hodnoty je popsaný v Fuel Card Management .
Textace faktury
Text do faktury se nastavuje v Nastavení smluv se službami v časti Hromadná fakturace, pole Kód standardního textu PHM.
V poli je lookup do tabulky Kód standardních textů, kde uživatel založí pro fakturaci PHM záznam s textaci faktury.
V záložce Hromadný fakturace uživatel vybírá Kód Dimenze pro hromadnou fakturaci.
Nastavení na kartě zákazníka
Na kartě zákazníka se nastavuje:
Kód platební podmínky - Tankovací karty
nastavení systém používá při vystavovaní prodejných faktur pro pole Datum splatnosti (popsané v PD Adresář)
Způsob fakturace PHM a servisu
uživatel nastaví požadovanou fakturaci transakci tankovacích karet.
Může být: za zákazníka/za obchodné místo zákazníka/za smlouvu/za zákazníka a typ kalkulace/ za rámcovou smlouvu, tj. systém zpracuje jednu fakturu za obchodné místo anebo zákazníka anebo atd
Podle obchodného místa:
Hromadná úloha kontroluje obchodná místa:
Záznamy z transakci tankovacích karet
Systém kontroluje tab. Transakce tankovacích karet, pole číslo Obchodného místa
Poplatky
Kontroluje kartu tankovacích karet, pole obchodné místo
Pod tlačítkem Customer, volba Invoice Sending Methods se nastavují strukturované přílohy pro jednotlivých zákazníků.
Podrobnější popis v Address book .
Hromadná úloha – fakturace tankovacích karet
Transakce tankovacích karet se fakturují úlohou Hromadná fakturace tankovacích karet (Mass Invoicing Fuel Cards). Po dokončení úlohy systém zapisuje úspěch anebo neúspěch do Logu hromadný fakturace tankovacích karet (Fuel Card Mass Invoicing Log).
Proces
Úloha Hromadná fakturace tankovacích karet po spuštění hledá záznamy v tabulce Transakce tankovacích karet :
hledá záznamy, které mají pole Faktura vystavená (Invoiced) N
s filtrem s Datumem od - Datumem do z dialogového okna fakturační úlohy a v tabulce Transakce tankovacích karet hledá rozmezí datumů v poli Datum transakce
Filtruje na zákazníka a seskupuje záznamy (faktury) podle nastavení na kartě Zákazníka do nezaúčtovaný faktury
Systém vytváří hlavičku nezaúčtovaný faktury, do který plní:
číslo zákazníka
hodnotu v poli Typ tisku faktury: Fuel
hodnotu v poli Smlouva Kód: Mass v hlavičce faktury
Zúčtovací datum plní z dialogového okna z pole Zúčtovací datum
Datum DPH = plní z dialogového okna z pole Datum DPH
Datum splatnosti = Zúčtovací datum + Kód platební podmínky z karty zákazníka
Kód měny = zůstává prázdný bez ohledu na měnu zákazníka/smlouvy, faktura je vždy v lokální měně
Kód penalizace = Kód penalizace z karty zákazníka
Kód podmínky upomínkovaní = Kód podmínky upomínkovaní z karty zákazníka
Řádky faktury plní:
1 řádek faktury se dělá za 1 řádek bufferu. A v bufferu se seskupuje za smlouvu, Kód std. prodeje a DPH účto skupinu zboží. Tzn. transakce se stejnými hodnotami se sloučí do jednoho řádku bufferu, s odlišnými zakládá nové řádky bufferu. Plus nový řádek pro poplatek, který je zadaný na kartě tankovací karty.
Po vytvoření faktury zapisuje číslo faktury do tabulky Transakce tankovacích karet do pole Číslo prodejný faktury
Následně účtuje nezaúčtované faktury, tj. vytvoří se záznam v Přehlede zaúčtovaných faktur
Při účtovaní systém kontroluje celkovou částku faktury, ak je záporná (ve faktuře sú záporné řádky z Transakci tankovacích karet) sytém fakturu nevytvoří. Neúspěch zapíše do Logu.
Zapíše do Logu hromadný fakturace tankovacích karet úspěch případně neúspěch.
V případě neúspěchu systém:
nevytváří zaúčtovanou fakturu
Posílá task uživatelovi
Hromadná úloha zpracovává len typ dokladu faktura. Dobropis nevytváří.
Vygenerované přílohy v Attachmente dokumentu.
Transakce tankovacích karet
V případě zaúčtovaní faktury, systém vyplní v tabulce Transakce tankovacích karet pole:
pole Faktura vystavená na A
Číslo zaúčtované prodejný faktury
pole Zúčtovací datum zaúčtované prodejný faktury
Po zaúčtovaní systém zobrazí systémovou hlášku: X úspěšně zaúčtované faktury a neúspěšně Y. Přejete si otevřít log? A/N
Pokud zadá uživatel ANO – otevře se Log Tankovacích karet s filtrem len na vytvořené záznamy během spuštěni úlohy.
Zaúčtovanou fakturu je možné vydobropisovat standardní funkcionalitou, ale záznamy v tabulce Transakce tankovacích karet, pole Faktura vystavená ANO nezmění, tj. není možné vystavit opětovně fakturu. Je potřebné vytvořit nové záznamy importem transakci tankovacích karet.
Log hromadná fakturace tankovacích karet
Hromadná úloha zapisuje úspěch/neúspěch při fakturaci transakci tankovacích karet.
Neúspěch může vzniknout např. pokud není nastavené účtovaní, číselná rada, dimenze...
V případě neúspěchu, pokud je nastavená šablona v Nastaveních upozornění/úloh systém automaticky odešle task na uživatele viz kap. Automatické odesílaní taskuThe procedure for creating refueling transactions is described in Tankovací karty.
Invoicing Job Setup
Press Report
The system generates a report from the Invoice Printout Setup table.
The system determines which report to generate according to the Invoice Print Type on the posted invoice card.
Invoice Text and Dimensions
The text to the invoice is set in the Contract with Service Settings in the Mass Invoicing section, in the Fuel Standard Text Code field.
In the Mass Invoicing tab, the user selects the Dimension Code for mass invoicing.
No. Series
The number sequence for reinvoicing fuel card records is set in the Fuel Sales Invoice Numbers field in Contract with Service Setup. The Fuel Sales Credit Memo No. field is a ready-to-use field in case of further development.
A more detailed description in the Nastavení Business .
Pre-invoicing without/sec posted purchase invoice
Boolean determines whether the invoicing job includes/excludes records that have value in the Posted Purchase Invoice No. field.
A more detailed description in the Nastavení Business .
Posting Setup
In the invoice lines, the system fills in the G/L account number from the Standard Sales Code, which is defined in the invoicing interfaces for the given Fuel Card Code.
The amounts of reinvoiced records are overwritten from the Fuel Card Transaction table.
A description of how the value is calculated is described in Tankovací karty .
Invoice text
The text to the invoice is set in the Contract with Service Settings in the Mass Invoicing section, in the Fuel Standard Text Code field.
In the field, there is a lookup to the Standard Text Code table, where the user creates a record with the text of the invoice for fuel invoicing.
In the Mass Invoicing tab, the user selects the Dimension Code for mass invoicing.
Settings on the customer card
On the customer card, the following is set:
Payment Terms Code - Fuel cards
This setting is used by the system when issuing sales invoices for the Due Date field (described in PD Address Book)
Fuel and Maintenance Billing Method
The user sets up the required invoicing for the fuel card transaction.
It can be: per customer/per business location/per contract/per customer and calculation type/ per framework agreement, i.e. the system processes one invoice per business location or customer, or etc
By business location:
The bulk job checks the business locations:
Fuel Card Transaction Records
The system checks the tab. Fuel Card Transactions, Business Place No. field
Fees
Checks Fuel Card Field, Business Place Field
Under the Customer button, option Invoice Sending Methods, structured attachments are set for individual customers.
A more detailed description in the Adresář .
Mass Task - Fuel Card Invoicing
Fuel card transactions are invoiced using the Mass Invoicing Fuel Cards task. When the task is completed, the system records success or failure in the Fuel Card Mass Invoicing Log.
Process
When the Fuel Card Mass Invoicing task is run, it looks for records in the Fuel Card Transactions table:
searches for records that have the Invoiced N field
with a filter with Date From - Date To from the Invoicing Job dialog window and searches for a range of dates in the Transaction Date field in the Fuel Card Transactions table
Filters on the customer and groups records (invoices) according to the settings on the Customer card into unposted invoices
The system creates an unposted invoice header in which the following is performed:
Customer No.
value in the Invoice Print Type field: Fuel
value in the Contract Code: Mass field in the invoice header
Fills in the posting date from the Posting Date field in the dialog box
VAT Date = Populate from the dialog box from the VAT Date field
Due Date = Posting Date + Payment Terms Code from Customer Card
Currency code = remains blank regardless of customer/contract currency, invoice is always in local currency
Penalty Code = Penalty Code from Customer Card
Reminder Term Code = Reminder Term Code from Customer Card
Invoice lines are fulfilled by:
1 invoice line is made for 1 buffer line. And in the buffer, it is grouped after the contract, Code std. sales and VAT product posting group. I.e. transactions with the same values are merged into one buffer row, with different values new buffer rows are created. Plus a new line for the charge that's entered on the fuel card card.
After the invoice is created, it writes the invoice number in the Fuel Card Transactions table in the Sales Invoice No. field
Subsequently, it posts unposted invoices, i.e. a record is created in the List of Posted Invoices
When posting, the system checks the total amount of the invoice, if it is negative (in the invoice there are negative lines from Fuel Card Transactions) the system does not create an invoice. Failure is recorded in the Log.
Writes the mass invoicing of fuel cards success or failure into the Log.
In case of failure, the system:
does not create a posted invoice
Sends a task to the user
The bulk task processes only the document type: invoice. It does not create a credit memo.
Generated attachments in the Attachmente document.
Fuel Card Transactions
When the invoice is posted, the system fills in the following fields in the Fuel Card Transactions table:
Invoice issued to A field
Posted Sales Invoice No.
Posting Date field of posted sales invoice
After posting, the system displays the following system message: X successfully posted invoice and unsuccessfully Y. Do you want to open the log? Y/N
If the user enters YES – the Fuel Card Log will be opened with a filter only for the records created during the job execution.
A posted invoice can be credited using the standard functionality, but the records in the Fuel Card Transactions table, the Invoiced YES field will not change, i.e. it is not possible to issue an invoice again. You need to create new records by importing fuel card transactions.
Fuel Card Mass Invoicing Log
The Bulk Task records the success/failure of invoicing fuel card transactions.
Failure can occur, for example, if posting, numerical series, dimensions...
In case of failure, if the template is set in the Alert/Task Settings, the system will automatically send the task to the user, see chapter II. Automatic task sending.