PoleField:
ČísloNumber
číslo kalkulace/smlouvy
přiřadí wizard na založení kalkulace anebo wizard na vytvoření smlouvy.
Typ financování
hodnota se převezme z průvodce, ve formuláři je to needitovatelné pole
Kód typu produktu financování
pole zobrazuje informaci o typu produktu financování, je vyplněno wizardem na založení smlouvy. Typ produktu definuje základní nastavění produktu
Popis typu produktu financování
název typu produktu financování
po rozkliknutí se otevře daný typ produktu financování.
Číslo produktu financování
pole zobrazuje informaci o produktu financování, je vyplněno wizardem na založení smlouvy. Produkt financování obsahuje detailnější definici produktu.
Název produktu financování
Název produktu financování zobrazí OC podle číslo produktu financování
Po rozkliknutí se zobrazí karta daného produktu financování
Číslo šablony financování
pole zobrazuje informaci o šabloně financování, pokud byla ve wizardu na založení šablona vybrána. Šablona financování může obsahovat ještě jemnější definice produktu, slouží jako šablona s předdefinovanými hodnoty kalkulace/smlouvy.
Název šablony financování
Název šablony financování zobrazí OC podle číslo šablony financování
Po rozkliknutí se zobrazí karta dané šablony financování
Model smlouvy
pole zobrazuje informaci o modelu smlouvy, který určuje kalkulační a jiné parametry smlouvy. Pole je needitovatelné, je definován na vzoru smlouvy
Po rozkliknutí se zobrazí karta daného modelu financování
Číslo vzoru
číslo vzoru, který obsahuje některé účetní nastavění pro smlouvu. Pole je needitovatelné, vzor je definován na produktu financování.
Po rozkliknutí se zobrazí karta daného vzoru financování
Pobočka
pole zobrazuje informaci o pobočce, pod kterou je smlouva založená. Pole lze editovat.
Číslo zdrojové kalkulace
doplní systém automaticky
pokud byla kalkulace vytvořená kopírováním z jiné kalkulace, pak je zde uvedeno číslo původní kalkulace
pokud byla vytvořená smlouva z kalkulace, pak je zde uvedeno číslo kalkulace, ze které byla smlouva vytvořena.
Číslo zdrojové smlouvy
doplní systém automaticky
pokud byla kalkulace vytvořená kopírováním z jiné smlouvy, pak je zde uvedeno číslo původní smlouvy
Kód právní formy
Doplní OC Kód právní formy zákazníka z wizardu na založení kalkulace/smlouvy
Pokud je pole prázdné po založení kalkulace/smlouvy z wizardu, pak systém hodnotu doplní po výběru Čísla zákazníka
Needitovatelné
Číslo zákazníka
Doplní OC automaticky Číslo zákazníka, zadané ve wizardu
Editovatelné pro kalkulace/smlouvu před aktivaci, lookup do adresáře zákazníku. Výběr předfiltrován na Právní formu. Pokud je Kód právní formy prázdný na kartě kalkulace/smlouvy, pak systém filtruje dle Kód právní formy, který je povolen na produktu/šabloně financování
Při změně čísla zákazníka OC zobrazí hlášku, jestli chce uživatel opravdu změnit zákazníka. Po potvrzení provede následující úkony:
Automaticky přepíše číslo zákazníka na kartě předmětu financování a zobrazí hlášku
Automaticky přepíše číslo zákazníka na všech pojistných smlouvách (hromadných i individuálních).
V případě, že na pojistné smlouvě byla použita pojistná sazba vázána na původního zákazníka (výjimka), systém provede změnu zákazníka, smaže nevyhovující sazbu, příp. variantu produktu a zobrazí hlášku „Pojistné smlouvě č. XY nevyhovovala sazba, proto byla sazba smazána. Upravte pojistnou smlouvu ručně a aktualizujte nabídku.“.
V případě, že na pojistných smlouvách byla použita sazba vyhovující i novému zákazníkovi, pak systém zobrazí hlášku „Zákazník byl změněn, je potřeba aktualizovat nabídku.“
Po doplnění čísla zákazníka Customer No. (2) na hlavičku smlouvy o financování (zákazník nebyl vyplněn při vytvoření kalkulace/smlouvy), OC doplní pole:
Kód platební podmínky Payment Terms Code (93) z pole Kód platební podmínky financování
Kód podmínky penále Charge Terms Code (1654)
Kód podmínky upomínky (nové pole)
Kód právní formy
z polí na zákazníkovi, pokud jsou tyto vyplněné.
V případě, že na kartě zákazníka je dané pole prázdné, OC ponechá hodnotu pole na hlavičce smlouvy bez změny
Po ruční změně čísla zákazníka Customer No. (2) na hlavičce smlouvy o financování (na neaktivní smlouvě, nejedná se o převod smlouvy na nového zákazníka), OC doplní pole:
Kód platební podmínky Payment Terms Code (93) z pole Kód platební podmínky financování ze zákazníka
Kód podmínky penále Charge Terms Code (1654)
Kód podmínky upomínky (nové pole)
z polí na kartě zákazníka, pokud jsou tyto vyplněné
Po ruční změně čísla zákazníka nedochází k aktualizaci účto skupin smlouvy – tzn. například změna tuzemského zákazníka na zahraničního (nebo naopak) není doporučena. V takových případech se odporučí zrušení nabídky (smlouvy před aktivací) a vytvoření nové pro správného zákazníka.
Název zákazníka
Pokud bylo vybráno Číslo zákazníka, doplní OC automaticky z adresáře zákazníku
Pokud nebylo vybráno Číslo zákazníka, doplní OC automaticky hodnotou zadanou ve wizardu anebo název může doplnit uživatel manuálně
Automaticky se propíše při každé změně Čísla zákazníka
Editovatelné pouze v případě, že Číslo zákazníka je prázdné
Typ smlouvy
Jednopředmětová/Více předmětová
Doplní systém automaticky z produktu/šablony
Pro smlouvy se službami je možné použít pouze volbu Jednopředmětová.
Číslo předmětu financování
Číslo předmětu doplní systém automaticky po založení předmětu. Po kliknutí se otevře karta předmětu
Uživatelsky needitovatelné pole
Název předmětu financování
Název daného předmětu. Po kliknutí se otevře přehled předmětů s filtrem na dané číslo předmětu.
Uživatelsky needitovatelné pole
Všeob. obch. podmínky kód
doplní systém automaticky z produktu financování (podformulář Měna a kalkulační parametry).
Při změně Všeob.obch.podm.kód OC automaticky dotáhne nové hodnoty Kód podmínky penále, Kód platební podmínky a Kód podmínky upomínky podle nového kódu všeob.obch.podmínek, pokud:
Pro smlouvy se Smlouva se službami=N: na Zákazníkovi jsou tyto pole prázdné (pokud jsou na Zákazníkovi vyplněny, OC hodnoty z VOP nedotáhne)
Pro smlouvy se Smlouva se službami=A (oper.leasing a zpráva voz.parku):
na Zákazníkovi jsou tyto pole prázdné a Číslo rámcové smlouvy na smlouvě je prázdné anebo
na Zákazníkovi jsou tyto pole prázdné, Číslo rámcové smlouvy na smlouvě je neprázdné a kódy jsou na rámcové smlouvě zákazníka prázdné
Kód měny
Doplní systém automaticky ze vzoru, uživatelsky needitovatelné pole
Pokud je prázdné – měnou smlouvy je lokální měna.
Datum kurzu smlouvy
Doplní systém automaticky
Pokud je Kód měny
Prázdní
Doplní systém automaticky workdate (prac.datum) vytvoření kalkulace. Při aktivaci se nemění.
Neprázdní
Systém dohledá Kurz smlouvy v tabulce Currency Exchange Rates (viz popis dál), pak převezme datum z pole Starting Date.
Kurz smlouvy
Výchozí hodnota je 1, plní se při založení kalkulace/smlouvy do tabulky Financing Contract Header.
Pokud je Kód měny
Neprázdní
Systém dohledá (počítá) Kurz smlouvy při založení kalkulace následovně:
Vezme Kód měny (Currency) a Datum vytvoření kalkulace (=work date, resp. Reference Date)
Pokračuje do tabulky Currency Exchange Rate (330) a hledá řádek pro daný kód měny a Starting Date= Datum vytvoření kalkulace. Pokud neexistuje, hledá řádek s nejbližším nižším Starting Date. Pokud nalezne, vypočte Kurz smlouvy
Calculation/Contract No.
Assigns a wizard to create a calculation or a wizard to create a contract.
Financing Type
The value is taken from the wizard, in the form it is a non-editable field
Financing Product Type Code
The field displays information about the type of financing product, it is filled in by the wizard for creating a contract. The product type defines the basic settings of the product
Financing Product Type Description
Financing Product Type Name
When clicked, the given type of financing product opens.
Financing Product No.
The field displays information about the financing product, it is filled in by the wizard for creating a contract. Financing product contains a more detailed definition of the product.
Financing Product Name
Financing Product Name displays OC by Financing Product No.
After clicking, the card of the financing product will be displayed
Financing Template No.
The field displays information about the financing template, if the template has been selected in the wizard. A financing template can contain even finer product definitions, serving as a template with predefined calculation/contract values.
Financing Template Name
Financing Template Name will be displayed by OC according to Financing Template No.
When clicked, the card of the financing template will be displayed
Contract Model
The field displays information about the contract model that determines the calculation and other parameters of the contract. The field is non-editable, it is defined on the contract template
After clicking, the card of the given financing model will be displayed
Template No.
A template number that contains some of the accounting settings for the contract. The field is non-editable, the template is defined on the financing product.
After clicking, the card of the given financing template will be displayed
Branch
The field displays information about the branch under which the contract is created. The field can be edited.
Source Calculation No.
Fills up the system automatically
If the calculation was created by copying from another calculation, then the number of the original calculation is given here
If a contract was created from a calculation, then the number of the calculation from which the contract was created is listed here.
Source Contract No.
Fills up the system automatically
If the calculation was created by copying from another contract, then the number of the original contract is given here
Legal Form Code
Adds OC Code of the customer's legal form from the wizard for creating a calculation/contract
If the field is empty after creating a calculation/contract from the wizard, then the system will fill in the value after selecting the Customer No.
Non-editable
Customer No.
Fills in the OC automatically with the Customer No. entered in the wizard
Editable for calculations/contracts before activation, lookup to customer directory. Selection pre-filtered to Legal form. If Legal Form Code is empty on the Calculation/Contract tab, then the system filters by Legal Form Code that is enabled on the Financing Product/Template
When changing the customer number, the OC displays a message if the user really wants to change the customer. After confirmation, it performs the following actions:
Automatically overwrites the customer number on the financed object card and displays the message
Automatically overwrites the customer number on all insurance contracts (collective and individual).
If an insurance rate linked to the original customer (exception) has been used in the insurance contract, the system will change the customer, delete the unsatisfactory rate or product variant and display the message "The insurance contract No. XY did not meet the rate, so the rate was deleted. Edit the insurance contract manually and update the quote.".
If a rate suitable for a new customer has been used on the insurance contracts, then the system will display the message "The customer has been changed, the offer needs to be updated."
After replenishment Customer No. (2) on the header of the financing contract (the customer was not filled in when creating the calculation/contract), the OC fills in the field:
Payment Terms Code (93) from the Financing Payment Terms Code field
Charge Terms Code (1654)
Reminder Terms Code (new field)
Legal Form Code
from the fields on the customer, if they are filled in.
If the field is blank on the customer card, the OC will leave the value of the field on the contract header unchanged
After Manual Change Customer No. Customer No. (2) on the header of the financing contract (on an inactive contract, this is not a transfer of the contract to a new customer), OC fills in the field:
Payment Terms Code (93) from the Financing Payment Terms Code from Customer field
Charge Terms Code (1654)
Reminder Terms Code (new field)
from the fields on the customer card, if they are filled in
After changing the customer number manually Does not occur It is not recommended to update the posting groups of the contract – i.e. for example changing from a domestic customer to a foreign customer (or vice versa). In such cases, it is recommended to cancel the offer (contract before activation) and create a new one for the correct customer.
Customer Name
If the Customer No. has been selected, it will fill in the OC automatically from the customer directory
If the Customer No. has not been selected, the OC will be automatically filled in with the value entered in the wizard or the name can be filled in manually by the user
It is automatically copied every time the Customer No. is changed
Editable only if Customer No. is blank
Contract Type
Single Subject/Multiple Subject
Completes the system automatically from the product/template
For contracts with services, only the Single Object option can be used.
Financed Object No.
The course number will be filled in automatically by the system after the course is created. Click to open the item card
Non-user-editable field
Financed Object Name
The name of the course. After clicking, an overview of courses will open with a filter for the given course number.
Non-user-editable field
General. Terms and Conditions Code
completes the system automatically from the financing product (Currency and Calculation Parameters subform).
When changing the General Business Condition Code OC Automatically tightens new values Finance Charge Terms Code, Payment Terms Code and Reminder Terms Code according to the new Terms and Conditions Code if:
For contracts with Contract with services=N: these fields are empty on the Customer (if they are filled in on the Customer, the OC will not complete the values from the GTC)
For contracts with Contract with Services=A (Operating Lease and Fleet Report):
on the Customer, these fields are blank and the Framework Agreement No. on the contract is blank, or
on the Customer page these fields are empty, the Master Agreement No. on the contract is blank and the codes on the customer master agreement are blank
Currency Code
Fills in the system automatically from a template, non-user-editable field
If empty – the contract currency is the local currency.
Contract Exchange Rate Date
Fills up the system automatically
If the Currency is
Empty
The system will automatically fill in the workdate of the calculation creation. It does not change when activated.
Not empty
The system looks up the Contract Exchange Rate in the Currency Exchange Rates table (see description below), then takes the date from the Starting Date field.
Contract Exchange Rate
The default value is 1, it is filled in when creating a calculation/contract in the Financing Contract Header table.
If the Currency is
Not empty
The system finds (calculates) the exchange rate of the contract when creating the calculation as follows:
Takes Currency Code and Calculation Creation Date (=work date or Reference Date, respectively)
It continues to the Currency Exchange Rate table (330) and looks for the row for the given currency code and Starting Date= Calculation Creation Date. If it doesn't exist, it looks for the row with the next lower Starting Date. If found, it calculates the Contract Exchange Rate:
Contract Exchange Rate = round(1/Currency Factor; 4) = round(1/ (Exchange Rate Amount/Relational Exch.Rate Amount); 4)
Pozn.Note: vzorec přes the Currency Factor je standardem formula is the BC
standard
By clicking on the field, it is possible to open the Contract Exchange Rate History ), prví záznam vzniká při založení kalkulace/smlouvy:
Číslo smlouvy (table, the first record is created when creating a calculation/contract:
Contract No.)
Default=prázdní
Plněno automaticky ze smlouvy z hlavičky smlouvy
Skryté pole.
empty
Fulfilled automatically from the contract from the contract header
Hidden field.
Line No.)
Default=prázdníPlní systém automaticky při založení řádku aktuální hodnotaempty
Does the system fill in automatically when creating a row current value+10000
Skryté pole
Hidden field
Currency Code)
Default=prázdní
Plní systém automaticky z hlavičky smlouvy Kód měny (Currency Code)
Needitovatelné
empty
Fills the system automatically from the contract header Currency Code
Non-editable
Contract Exchange Rate Date)
Default=prázdní
Plní systém automaticky z hlavičky smlouvy Datum kurzu smlouvy
Needitovatelné
empty
Does the system fill in automatically from the contract header Contract Exchange Rate Date
Non-editable
Contract Exchange Rate)
Default=prázdní
Plní systém automaticky z hlavičky smlouvy Kurz smlouvy
Needitovatelné
empty
Fills the system automatically from the contract header Contract Exchange Rate
Non-editable
Contract Exchange Rate Introduction (Contract Exchange Rate Origin)
Default=Počáteční (Initial)
ENUM=Počáteční,Předmět,Doplňková výbava (Initial,Object,Addit.Equipment)
Needitovatelné
Non-editable
The Contract Exchange Rate History table is included in all copy functions:
Copy offer/contract
Delete (offer/contract‘contract'
Create Contract from Offer
Change Copy functionalities
Variant functionalities
Pole je uživatelsky needitovatelnéThe field is not user-editable.
Stav
hlavní stav kalkulace / smlouvy. Je určen na detailním stavě. Je needitovatelné, systém přepíná automaticky ve vazbě na detailní stav.
Hodnoty=Kalkulace, Nabídka, Čeká na schválení, Schválená, Podepsaná, Aktivní, Pozastavená, Ukončovaná, Vypořádaná, Archivovaná, Vzor, Změnová kopie
Detailní stav smlouvy
Inicializační stav přiřadí systém automaticky, následné přepínání stavů provede uživatel ručně (před aktivací) anebo průvodcem (po aktivaci smlouvy).
Status
The main status of the calculation/contract. It is designed on a detailed build. It is non-editable, the system switches automatically in relation to the detailed status.
Values=Calculation, Quote, Waiting for Approval, Approved, Signed, Active, Suspended, Terminated, Settled, Archived, Template, Change Copy
Detailed Contract Status
The initial status is assigned by the system automatically, the subsequent status switching is performed by the user manually (before activation) or by a wizard (after contract activation).
When manually changing the field after clicking on the field, the lookup to API is Det.Contr.Status Seq. Def. (4046812) s filtrem nawith a filter on:
Original Det.Status Code (1) = aktuální detailní stav smlouvy a zároveňcurrent detailed status of the contract and at the same time
Allow Manual Status Change (10) = Y (tzn. zobrazí pouze ty přechody kde je povolena manuální změna) a zároveňPokud je pole i.e. show only those transitions where manual change is allowed) and at the same time
If the Financing with Services (4026780) v smlouvěfield is in the contract:
N – bude filtrovat ještě na ty přechody, které mají v definici povolených přechodů will filter to those transitions that have Financing with Services=All anebo NY – bude filtrovat ještě na ty přechody, které mají v definici povolených přechodů or N in the definition of allowed transitions
Y – will filter to those transitions that have Financing with Services=All anebo Y
Název detailního stavu smlouvy
Název daného detailního stavu smlouvy. Po kliknutí se otevře přehled detailních stavů smlouvy s filtrem na daný detailní stav smlouvy.
Datum poslední změny det.stavu smlouvy
Plní systém automaticky při změně detailního stavu smlouvy.
Datum vytvoření nabídky
Doplní systém automaticky podle pracovního data, pokud se vytváří kalkulace (nabídka):
Průvodce vytvořením kalkulace/smlouvy volba Typ=Kalkulace (pro FL a UV) anebo
Průvodce vytvořením kalkulace se službami (OPL se službami).
Uživatelsky editovatelné
Datum platnosti nabídky
Defaultně je nastavený Datum vytvoření nabídky +datumový vzorec podle Výchozí doba platnosti nabídky v Nastavení OneCore.
Pole je uživatelsky editovatelné.
Datum vytvoření smlouvy
Needitovatelné. Vyplní systém automaticky při vytvoření smlouvy z kalkulace podle pracovního datumu.
Datum podpisu zákazníka
Defaultně prázdné. Vyplní uživatel datum podpisu smlouvy zákazníkem
Při aktivaci smlouvy musí být pole vyplněno
Datum podpisu fin. společnosti
Defaultně prázdné. Vyplní uživatel datum podpisu smlouvy finanční společnosti
Vztažné datum (Reference Date)
Pomocné datum, plní systém automaticky při vytvoření kalkulace/smlouvy podle pracovního datumu (workdate).
Dle tohoto pole systém dohledává REFI kód a REFI sazby
Datum se automaticky zaktualizuje dle aktuálního systémového data při:
Změně Typu úrokové sazby
Změně REFI kódu
Při individuální účtování ze splátkového kalendáře
V rámci úlohy „Účtovat splátky financování (bez služeb) – úloha na ruční spouštění
V rámci úlohy „Dávkové účtování splátek (plánovač bez služeb) – úloha na automatické spouštění v rámci fronty úloh (plánovač)
Předpokládané datum předání (Expected Handover Date)
Doplní OC automaticky podle nastavení na Modelu smlouvy (Vysvětlení: Pole je potřebné k výpočtu splátek. Pole je potřebné kvůli stanovení trvání smlouvy).
Datum předání (Handover Date)
Needitovatelné, plní systém při aktivaci.
Datum začátku kalkulace (Calculation Starting Date)
Needitovatelné. Plní systém automaticky podle nastavění na modelu financování.
Je to prví den trvání splátkového kalendáře.
Datum předpokládaného ukončení (Expected Termination Date)
Na základě doby trvání smlouvy v měsících a pole Expected Handover Date systém vypočítá Datum předpokládaného ukončení smlouvy a zobrazí jej v tomto poli. Pole je needitovatelné.
Datum a čas poslední změny
Doplní systém automaticky podle systémového data a času provední změny. Pole je uživatelsky needitovatelné.
Změnil
Doplní systém automaticky ID přihlášeného uživatele, který změnu provedl. Pole je uživatelsky needitovatelné.
Změnil – název
Doplní systém automaticky název přihlášeného uživatele podle ID uživatele, který změnu provedl. Pole je uživatelsky needitovatelné.
Migrovaná smlouvy
Systémový needitovatelný příznak, přebírá se z produktu (pro migrované smlouvy se doporučuje založení samostatného produktu).
Needitovatelné
Kód poslední změny
Needitovatelné. Vyplní systém při změně smlouvy.
Změnová kopie existuje
Příznak, jestli k smlouvě existuje změnová kopie. Uživatelsky needitovatelné
Změnová kopie ke smlouvě číslo
Pokud uživatel má otevřenou smlouvu, ke které existuje změnová kopie, systém v tomto poli zobrazuje číslo originálu smlouvy.
Změnová kopie
V tomto poli systém zobrazuje příznak, zda ke smlouvě existuje změnová kopie. Pokud ano, tak je v tomto poli zatržítko A. Pole je needitovatelné.
ID uživatele změnové kopie
v případě, že aktuální smlouva je změnovou kopií, je v tomto poli zobrazeno ID uživatele, který vytvořil a může editovat změnovou kopii. Pole je needitovatelné.
Počet variant kalkulace
pokud k dané smlouvě existují varianty kalkulace, systém zobrazuje jejich počet. Po rozkliknutí se otevře přehled smluv, ve kterém se zobrazují varianty kalkulace dané smlouvy.
Varianta kalkulace
příznak. Pokud uživatel má otevřenou variantu kalkulace, příznak je A.
Stav varianty kalkulace
option s hodnotami:
Aktivní – stav varianty je aktivní, pokud je jí možné přenést do originálu. Nastavuje systém automaticky při založení varianty
Neaktivní – stav varianty je neaktivní, pokud jí není možné přenést do originálu. Nastavuje systém automaticky na nepřenesených variantách při přenosu dané varianty
Přenesena – stav přenesené varianty po jejím přenosu do originálu
Datum a čas vytvoření varianty kalkulace
- datum a čas vytvoření dané změnové kopie
or Y in the definition of allowed transitions
Detailed Contract Status Name
The name of the detailed contract status. When clicked, an overview of detailed contract statuses opens with a filter for the given detailed contract status.
Last Det. Status Change Date
It fills the system automatically when the detailed status of the contract changes.
Offer Creation Date
It fills in the system automatically according to the working date, if a calculation (offer) is being created:
Create Calculation/Contract Wizard option Type=Calculation (for FL and UV) or
Create Calculation with Services Wizard (OPL with Services).
User-editable
Offer Validity Date
By default, the Offer Creation Date is set + date formula according to Default Offer Validity Period in OneCore Settings.
The field is user-editable.
Contract Creation Date
Uneditable. Filled in automatically by the system when creating a contract from the calculation according to the working date.
Contract Signing Date (Customer)
Empty by default. The user fills in the date of signing the contract by the customer
When the contract is activated, the field must be filled in
Contract Signing Date of the Financial Company
Empty by default. The user fills in the date of signing the contract of the financial company
Reference Date
Auxiliary date is filled by the system automatically when a calculation/contract is created according to the workdate.
According to this field, the system searches for REFI code and REFI rates
The date is automatically updated according to the current system date when:
Changing the type of interest rate
Changing the REFI code
In case of individual posting from a payment calendar
As part of the "Post Financing Instalments (Without Services)" task – Task to run manually
Within the job "Batch Payment Posting (Scheduler Without Services) – Task to run automatically within the job queue (scheduler)
Expected Handover Date
Completes the OC automatically according to the settings on the Contract Model (Explanation: The field is needed to calculate payments. The field is needed to determine the duration of the contract).
Handover Date
Non-editable, fills the system upon activation.
Calculation Starting Date
Uneditable. It fills the system automatically according to the settings on the financing model.
It is the first day of the repayment schedule.
Expected Termination Date
Based on the duration of the contract in months and the Expected Handover Date field, the system calculates the Expected Contract Termination Date and displays it in this field. The field is non-editable.
Last Modified DateTime
Fills the system automatically according to the system date and time the change was made. The field is not user-editable.
Changed
The system automatically fills in the ID of the logged-in user who made the change. The field is not user-editable.
Modified By Name
The system automatically fills in the name of the logged-in user according to the ID of the user who made the change. The field is not user-editable.
Migrated Contracts
System non-editable flag, it is taken from the product (for migrated contracts, it is recommended to create a separate product).
Non-editable
Last Change Code
Uneditable. Fills in the system when the contract changes.
Change Copy Exists
Flag if there is a change copy for the contract. Non-editable by the user
Change Copy to Contract No.
If the user has an open contract for which there is a change copy, the system displays the original contract number in this field.
Change Copy
In this field, the system displays a flag of whether there is a change copy for the contract. If so, there is a check mark A in this field. The field is uneditable.
Change Copy User ID
If the current contract is a change copy, this field shows the ID of the user who created and can edit the change copy. The field is non-editable.
Number of Calculation Variants
If there are calculation variants for a given contract, the system displays their number. After clicking, the contract overview opens, in which the calculation variants of the contract are displayed.
Calculation Variant
symptom. If the user has an open calculation variant, the flag is A.
Calc. Variant Status
Option with values:
Active – the status of the variant is active if it can be transferred to the original. Sets the system automatically when creating a variant
Inactive – the variant status is inactive if it cannot be transferred to the original. Sets the system automatically on non-transferred variants when transferring the given variant
Transferred – state of the transferred variant after its transfer to the original.
Date and Time of Creation of Calculation Variant
Date and time the change copy was created.