On the Maintenance Permission Lines tab on the Maintenance Permission Lines tab, the user has an overview of the lines for the given allowance.
More detailed information about the "service permission line" can be found on the line card. The tab will be displayed via Manage/Edit or View. Or it can be opened on the list of rows, the user clicks on a specific row and the system opens the card of the permission line.
Service type and service type on the maintenance permission line
When creating maintenance permission lines, the system presets the "service type" and "service type" lines from the header.
The user can change it.
E.g. within one approval number for service, it is necessary to create a line for "replacement vehicle" or "tire", the action will be added to the invoice for the service. In this case, the user changes the "service" on the permit line - he selects the service type "replacement vehicle" and continues to enter the line.
The Category, Subcategory, and Maintenance Code settings are the settings for the maintenance permission line, and the system will allow you to select Same settings for "Replacement Vehicle" under the heading "Service" and "Insurance Claim". You just need to specify the correct "kind of service" on the line.
The advantage of using a different type of service for an insured event is that the user does not lose the link that the actions with the other type of service were related to the insured event (in the header of the allowance).
Some types of services are not related to a maintenance permit. For example, if the user selects the value Service Type=Road Tax, the system displays an error message and the user cannot continue (the service permit cannot be based on Road Tax).
General Tab
The tab is used to enter the purchase.
The tab contains non-editable fields, typed from the header of the Maintenance Permission:
Maintenance Permission No.
Insurance Claim No.
Financing Contract No.
Chassis No. (VIN)
Serial number
Licence Plate No.
On the Maintenance Permission line, the user enters:
...
Service type (Service Kind) and Service Type (Maintenance Type Code)
The Service Type and Service Type are written from the Maintenance Permission header to the line, but the user can change it. This means that a maintenance permission can contain approved lines with different services under a single number. E.g. the approval number with Service Type Maintenance may also contain lines for Replacement Car or Tire Service. The cost from the vendor comes on a single purchase invoice.
...
Maintenance categories (Category Code)
The user selects the setting of the cost page of the service from the 1st level code list.
...
Maintenance subcategories (Subcategory Code)
The user selects the cost page setting of the service from the 2nd level code list.
...
Maintenance Code
The user selects the cost page setting of the service from the 3rd level code list.
...
Description (Description)
The system carries the description from the maintenance code. The user can edit.
...
Standard Purchase Code (Standard Purchase Code)
After you select a Level code, the system transfers the standard purchase and sales code for posting that is set on the maintenance code to the line.
...
Registered number tire/rim (Registered Number)
If the registered number is set on the maintenance code, the system will transfer it. The user can keep records.
The registered number is important for tires and rims
...
Unit of Measure Code (Unit Of Measure Code)
The user can select a unit of measurement from the dial list if its value has meaning on the line.
...
Expected price excl. VAT (Expected Price Excl. VAT)
The user can enter an agreed estimated price.
Evidence Fields
...
Purchase Price Excl. VAT (Purchase Price Excl.VAT)
The user enters the agreed purchase price, which will be the basis for the purchase invoice line in the OC.
If the maintenance code used is labeled Direct Compensation by Insurance Company, then the purchase price must be negative.
...
Uživatel má na hlavičce povolení servisu na záložce Řádky povolení servisu k dispozici přehled řádků k dané povolence.
Podrobnější informaci „řádku servisní povolenky“ získá na kartě řádku,. Kartu zobrazí přes Spravovat / Úpravy nebo Pohled. Nebo lze otevřít na přehledu řádků, uživatel klikne na konkrétní řádek a systém otevře kartu řádku povolení.
Druh služby a typ služby na řádku povolení servisu
Při tvorbě řádků povolení servisu systém přednastaví na řádek „druh služby“ a „typ služby“ z hlavičky.
Uživatel jej může změnit.
Např. v rámci jednoho čísla schválení za servis je třeba založit i řádek za „náhradní vozidlo“ nebo „pneu“, úkon přijde na faktuře za servis. V tomto případě uživatel na řádku povolenky „servisu“ změní - vybere druh služby „náhradní vozidlo“ a pokračuje v zadávání řádku.
Nastavení kategorie, podkategorie a kódu údržby je nastavení pro řádek povolení servisu a systém dovolí vybrat stejné nastavení pro „náhradní vozidlo“ pod hlavičkou „servis“ i „pojistná událost“. Stačí určit správný „druh služby“ na řádku.
Výhodou použití jiného druhu služby u pojistné událost je, že uživatel tak neztratí vazbu, že se úkony s jiným druhem služby týkaly pojistné události (v hlavičce povolenky).
Některé druhy služeb nesouvisí s povolením servisu. Pokud například uživatel vybere hodnotu Druh služby=Daň z MV (Road Tax), systém zobrazí chybou hlášku a uživatel nemůže dál pokračovat (na Road tax se servisní povolení nedá založit).
Záložka Obecné
Záložka slouží pro zadání nákupu.
Záložka obsahuje needitovatelná pole, propsaná z hlavičky povolení servisu:
Číslo povolení servisu
Číslo pojistné události
Číslo smlouvy o financování
Číslo karoserie (VIN)
Výrobní číslo
Registrační číslo vozidla
Na řádku povolení servisu uživatel zadá:
Druh služby (Service Kind) a Typ služby (Maintenance Type Code)
Druh služby a Typ služby se z hlavičky povolení servisu propíše na řádek, ale uživatel jej může změnit. To znamená že povolení servisu může obsahovat pod jedním číslem schválené řádky s různými službami. Např. číslo schválení s Druhem služby Servis může obsahovat i řádky za Náhradní vozidlo nebo Pneuservis. Náklad od dodavatele přijde na jedné nákupní faktuře.
Kategorie údržby (Category Code)
Uživatel vybere z číselníku 1. úrovně nastavení nákladové stránky služby.
Podkategorie údržby (Subcategory Code)
Uživatel vybere z číselníku 2. úrovně nastavení nákladové stránky služby.
Kód údržby (Maintenance Code)
Uživatel vybere z číselníku 3. úrovně nastavení nákladové stránky služby.
Popis (Description)
Systém přenese popis z kódu údržby. Uživatel může editovat.
Standardní kód nákupu (Standard Purchase Code)
Po výběru Kód úrovně systém přenese do řádku standardní kód nákupu a prodeje pro účtování nastavený na kódu údržby.
Evidenční počet pneu/ráfek (Registered Number)
Pokud je na kódu údržby evidenční počet nastavený, systém ho přenese. Uživatel může evidovat.
Evidenční počet je důležitý u pneumatik a ráfků
Kód měrné jednot (Unit Of Measure Code)
Uživatel může vybrat měrnou jednotku z číselníku, pokud její hodnota má na řádku význam.
Předpokládaná cena bez DPH (Expected Price Excl. VAT)
Uživatel může zadat dohodnutou předpokládanou cenu.
Evidenční pole
Nákupní cena bez DPH (Purchase Price Excl.VAT)
Uživatel zadá dohodnutou nákupní cenu, která bude podkladem pro řádek nákupní faktury v OC.
Pokud je použitý kód údržby označený Přímá náhrada pojišťovnou, pak nákupní cena musí být záporná.
Nákupní cena bez DPH (LM) (Purch.Price Excl.VAT (LCY))
Fill in the system – converts the "purchase price without VAT" into the local currency.
Vyplní systém – přepočítá „nákupní cenu bez DPH“ do lokální měny.
Sleva % (Discount %)
Fills in the system if it finds a set discount for a given item in the Discounts and Bonuses table of the Maintenance Agreement
Vyplní systém, pokud najde nastavenou slevu k dané položce v tabulce Slevy a bonusy rámcové servisní smlouvy
Sdružená nákupní faktura Associated Purch.Invoice Associated Purch.Invoice)
The flag is turned on by the user if it is necessary to add this line to an already created and not yet posted purchase invoice created from another allowance.
After checking it, you need to select "Purchase Invoice Number" in the following field. The selection is filtered to the unposted invoices of the vendor.
Purchase invoice number )
Příznak uživatel zapne, pokud je třeba přidat tento řádek do už vytvořené a zatím nezaúčtované nákupní faktury, vytvořené z jiné povolenky.
Po zatržení je třeba vybrat “číslo nákupní faktury” v následujícím poli. Výběr je zafiltrován na nezaúčtované faktury daného dodavatele.
Číslo nákupní faktury (Purchase Invoce No.)
Populates the system when creating a purchase invoice from a given line – the Create Purchase Invoice function. The function ticks the non-editable field "Purchase invoice created" and fills in "Purchase invoice creation date"
A user can select a purchase invoice number only if there is a pooled invoice.
Type Text (Type Text)
The user marks if the line contains only text. Can then be used for print invoicing.
Note (Coment)
Text box
After creating a purchase invoice and then posting, the system writes the following data to the line:
Purchase Invoice Created (Purchase Invoice Created)
- Purchase Invoice Creation Date
Vyplní system při vytvoření nákupní faktury z daného řádku – funkce Vytvořit nákupní fakturu. Funkce zatrhne needitovatelné pole “Nákupní faktura vytvořena” a vyplní “Datum vytvoření nákupní faktury”
Uživatel může číslo nákupní faktury vybírat jen v případě sdružené faktuy.
Typ text (Type Text)
Uživatel označí, pokud daný řádek obsahuje pouze text. Lze pak použít při fakturaci do tisku.
Poznámka (Coment)
Textové pole
Systém po vytvoření nákupní faktury a následném zaúčtování propisuje na řádek údaje:
Nákupní faktura vytvořena (Purchase Invoice Created)
Datum vytvoření nákupní faktury (Purch.Invoice Creation Date)
Posted Purchase Invoice No. Číslo zaúčtované nákupní faktura (Posted Purchase Invoice)
Vendor invoice number Číslo faktury dodavatele (Vendor Invoice No)
If the user fills them in before running the Create Purchase Invoice function, the system transfers the number to the function dialog box.
On the line, the user can set:
- Invoice To
Pokud je uživatel vyplní před spuštěním funkce Vytvořit nákupní fakturu, systém číslo přenese do dialogového okna funkce.
Na řádku může uživatel nastavit:
Fakturovat na (Invoice To)
Here, the user chooses who pays the costs, where the purchase invoices will go
The default value is Leasing Company
The second option, "customer", is just a record that the purchase invoice will go directly to the customer.
Sales Tab
On the Sales tab, you can set up reinvoicing of the cost to the client – the Reinvoice flag.
Already on the financing product or template, it is possible to set that the service should be reinvoiced to the customer. Then, when a maintenance permission is issued, the line is marked for reinvoicing, but the user can deselect it.
Standard Sales Code (Standard Sales Code)
The system transfers from the settings to the maintenance code
Reinvoice (Reinvoice)
If the user ticks the box, the system pre-fills in the "Amount to be reinvoiced" according to the purchase price excluding VAT on the line. The User can edit the Amount to be Reinvoiced. The system calculates the difference between the "amount to be reinvoiced" and the "purchase price excl. VAT" in the "Reinvoiced Amount Difference" field.
The field can be checked (preset) automatically by the system if any of the following cases occur:
The service of this type is not on the financing contract
The service on the financing contract is marked "reinvoice" (This can be specified on the financing product or financing template.)
The relevant "maintenance code" is set with the "reinvoice" flag
If the financing contract is in a foreign currency, the system converts the amount to be reinvoiced into the contract currency
The purchase price in the local currency is recalculated according to the current exchange rate of the currency from the header of the financing contract
The user can edit the amount to be reinvoiced, but must be aware that it is the amount in the contract currency.
Reinvoicing method (Reinvoice Method)
The default value is Mass Reinvoicing (Mas Invoice). The Mass Reinvoice Maintenance task then collects the allowance lines that are set up for reinvoicing.
Individual Invoice (Individual Invoice) – the user invoices by running the Reinvoice to customer immediately function
Billing (Billing) – the amount to be reinvoiced will be applied in the financial settlement
Excessive Damage Value (Excessive Wear) - the cost remains in the company's expenses, the amount to be reinvoiced is 0. It is not invoiced from the service permission. The system takes the expense from the item card - the "termination" tab, the "excessive wear" field - where the estimated value is. (the leasing company had excessive wear repaired)
Amount to be reinvoiced (Amount To Reinvoice Excl. VAT)
After checking the Reinvoice field, the system will pre-invoice the purchase price excluding VAT. The user can edit
Difference in reinvoiced amount (Reinvoiced Amount Difference)
The system calculates the difference between the purchase price and the amount to be reinvoiced
Note to customer (Comment for Customer)
A text field that can be used in printing for a customer
Reinvoice To (Reinvoice To)
By default, the customer number of the financing contract is filled in
If it is necessary to re-invoice to another entity, it is possible to select a different customer number in this field.
Reinvoiced (Reinvoiced)
This field is marked by the system when the sales invoice is created. It also enters the sales invoice number and, after posting, the number of the posted sales invoice.
Sales Invoice No. (Sales Invoice No.)
Populates the system after creating a sales invoice
Posted Sales Invoice No. (Posted Sales Invoice)
Fills in the system after the sales invoice is posted
Tire Service Tab
For the service type "tire service", it is possible to specify the data for the tire service type Tire or Rims. For other types of tire service (storage, tire change, rim accessories), the Tire Service Type will be "empty".
If there is an allowance line for the purchase of tires, after selecting the type of service, the system will fill in the "tire service code" from the service on the contract and add the tire category, width, profile and rim from the tire service detail.
Other Tab
Created automatically NO / YES
Non-editable field
The system marks Yes for rows that it creates additionally
When processing "Purchase to Limit" = Approval without Permission (Additional)
When processing the "data record import", the system additionally creates an allowance,
When processing an insurance claim on the list of invoices,
When you create a difference line between the FA amount in the list of invoices and the assigned SP lines or the assigned batch
Date of issue
When the line was created
Created
Which user created the allowance line
Repair To Date
Registration field, the user can record the date promised by the vendor
Bonus Tab
According to the maintenance code settings, whether it is work or material, the system fills in the bonus amount (material) or bonus amount (labour) when entering the purchase price on the line.
Based on the discount and bonus settings on the maintenance framework agreement, the code adds bonuses when a purchase invoice is created.
- Bonus No. (parts
Zde uživatel volí, kdo platí náklady, kam přijde nákupní faktury
Výchozí hodnota je Leasingová společnost
Druhá možnost “zákazník” je pouze evidence, že nákupní faktura půjde přímo k zákazníkovi.
Záložka Prodej
Na záložce prodej může nastavit přefakturaci nákladu na klienta – příznak Refakturovat.
Už na produktu financování či šabloně je možno nastavit, že služba má být zákazníkovi refakturovaná. Pak při vystavení povolení servisu je řádek označený k refakturaci, ale uživatel může odznačit.
Kód standardního prodej (Standard Sales Code)
Systém přenese z nastavení na kódu údržby
Refakturovat (Reinvoice)
Pokud uživatel pole zatrhne, systém předvyplní „Částku k refakturaci“ dle nákupní ceny bez DPH na řádku. Uživatel může Částku k refakturaci editovat. Systém do pole „Rozdíl refakturované částky“ dopočte rozdíl „částky k refakturaci“ oproti „nákupní ceně bez DPH“.
Pole může zatrhnout (přednastavit) systém automaticky v případě že nastal některý z těchto případů:
Služba daného typu není na smlouvě o financování
Služba na smlouvě o financování je označena „refakturovat“ (Může být zadáno na produktu financování či šablony o financování.)
Příslušný „kód údržby“ je nastaven s příznakem „refakturovat“
Pokud je smlouva o financování v cizí měně, systém částku k refakturaci přepočítává do měny smlouvy
Nákupní cenu v lokální měně přepočítá dle aktuálního kurzu měny z hlavičce smlouvy o financování
Uživatel může částku k refakturaci editovat, ale musí si být vědom, že je to částka v měně smlouvy.
Způsob refakturace (Reinvoice Method)
Výchozí hodnota je Hromadná refaktruace (Mas Invoice). Úloha Hromadná refakturace servisu pak sbírá řádky povolenek, nastavené k refakturaci.
Individuální faktura (Individual Invoice) – uživatel vyfakturuje spuštěním funkce Přefakturovat zákazníkovi okamžitě
Vyúčtování (Billing) – částka k refakturaci se uplatní ve finančním vyrovnání
Hodnota nadměrného poškození (Excessive Wear) - náklad zůstává v nákladech společnosti, částka k refakturaci je 0. Nepřefakturuje se z povolení servisu. Náklad při vyúčtování systém vezme z karty předmětu - záložka „ukončení“, pole „nadměrné opotřebení“ -kde je odhadovaná hodnota. (leasingová společnost dala opravit nadměrné opotřebení)
Částka k refakturaci (Amount To Reinvoice Excl. VAT)
Po zatržení pole Refakturovat systém předvylní nákupní cenou bez DPH. Uživatel může editovat
Rozdíl refakturované částky (Reinvoiced Amount Difference)
Systém počítá rozdíl mezi nákupní cenou a částkou k refakturaci
Poznámka pro zákazníka (Comment for Customer)
Textové pole, které lze využít v tisku pro zákazníka
Refakturovat komu (Reinvoice To)
Defaultně je vyplněno číslo zákazníka smlouvy o financování
Pokud je třeba přefakturovat jinému subjektu, je možno v tomto poli vybrat jiné číslo zákazníka.
Refakturované (Reinvoiced)
Toto pole označí systém po vytvoření prodejní faktury. Propíše také číslo prodejní faktury a po zaúčtování i číslo zaúčtované prodejní faktury.
Číslo prodejní faktury (Sales Invoice No.)
Vyplní systém po vytvoření prodejní faktury
Číslo zaúčtované prodejní faktury (Posted Sales Invoice)
Vyplní systém po zaúčtování prodejní faktury
Záložka Pneuservis
Při druhu služby „pneuservis“ je zde možno upřesnit údaje pro Typ pneuservisu Pneu nebo Ráfky. Pro ostatní typy pneuservisu (uskladnění, přezouvání, příslušenství k ráfkům) bude mít Typ pneuservisu hodnotu „prázdný“.
Pokud je řádek povolenky na nákup pneu, po výběru typu služby systém doplní „kódu služby pneumatik“ ze služby na smlouvě a doplní kategorii pneu, šířku, profil a ráfek z detailu služby pneu.
Záložka Ostatní
Vytvořeno automaticky NE / ANO
Needitovatelné pole
Systém označí Ano u řádků, které vytváří dodatečně
při zpracování „nákup do limitu“ = schválení bez povolení (dodatečné)
při zpracování „importu datové věty“ systém dodatečně tvoří povolenku,
při zpracování pojistné události na seznamu faktur,
při vytvoření rozdílového řádku mezi částkou fa v seznamu faktur a přiřazených řádků SP nebo přiřazené dávky
Datum vytvoření
Kdy řádek vznikl
Vytvořil
Který uživatel založil řádek povolenky
Datum opravy do
Evidenční pole, uživatel si může zaznamenat datum, které dodavatel přislíbil
Záložka Bonusy
Systém dle nastavení kódu údržby, zda se jedná o práci nebo o materiál při zadání nákupní ceny na řádku vyplní částku bonusu (materiál) nebo částku bonusu (práce).
Na základě nastavení slev a bonusů na rámcové servisní smlouvě kódu doplní při vytvoření nákupní faktury bonusy.
Číslo bonusu (materiál) (Bonus No. (parts)
Labour Číslo bonusu práce (labourpráce) bonus number (Bonus No. (labour))
Bonus % (partsmateriál) (Bonus % (parts)
Bonus % (labourpráce) (Bonus % (labour)Amount Excl. VAT (parts)
Částka bez DPH (materiál) (Amount Excl.VAT (parts)
Amount Excl. VAT (labourČástka bez DPH (práce) (Amount Excl.VAT (labour))
Bonus Invoiced Date
The system pre-fills the date according to the purchase invoice. Bonuses can be invoiced after the purchase invoice has been processed. The user can edit the date.
Default Bonus Invoice Date
The system fills in after the purchase invoice is posted. This is the default invoice date for bonuses.
If the maintenance code marked Direct compensation by insurance company is used on the allowance line, then the purchase price is negative and the system does not meet the Amount Excl. VAT (materials) or the Amount Excl. VAT (labour). The leasing company is entitled to a bonus from the entire purchase price, regardless of the fact that part of it was paid to the service directly by the insurance company.
Cancel Tab
If a purchase or sales credit memo exists for the line, the credit memo numbers are written to this FastTab.
Allowance approval
If the user changes the status of the Maintenance Permission to Approved – the system assigns an Approval number from the number series attached to the given "Service Type"
The system assigns an "Approval number" to the service permission, records the user who approved the permit, the date and time of approval – see the Maintenance Permission tab.
...
Datum fakturace bonusů
Systém předvyplní datum dle nákupní faktury. Fakturovat bonusy je možno po zpracování nákupní faktury. Datum může uživatel editovat.
Výchozí datum fakturace bonusů
Systém vyplní po zaúčtování nákupní faktury. Je to výchozí datum pro fakturaci bonusů.
Pokud je na řádku povolenky použitý kód údržby označený Přímá náhrada pojišťovnou, pak nákupní cena je záporná a systém neplní Částku bez DPH (materiál) ani Částku bez DPH (práce). Leasingová společnost má nárok na bonus z celé nákupní ceny bez ohledu na to, že část byla uhrazená servisu přímo pojišťovnou.
Záložka Storno
Pokud existuje k řádku nákupní nebo prodejní dobropis, jsou čísla dobropisů propsaná na tuto záložku.
Schválení povolenky
Pokud uživatel změní stav povolení servisu na Schválené – systém přidělí Schvalovací číslo z číselné řady, připojené k danému „Typu služby“
Systém přidělí na povolení servisu „Schvalovací číslo“, zapíše uživatele, který schválil povolenku, datum a čas schválení – viz záložka Povolení servisního úkonu.
Po změně stavu Schváleno již nemůže uživatel vrátit stav Příprava.